Search results for "E. Electrospinning"
showing 7 items of 7 documents
Preparation, characterization and hydrolytic degradation of PLA/PCL co-mingled nanofibrous mats prepared via dual-jet electrospinning
2017
Abstract PLA/PCL co-mingled nanofibrous mats were prepared via multi-jet electrospinning. The concentration of PLA and PCL in the co-mingled mats were controlled by changing the flow rate of the two polymer solutions. The amount of PLA and PCL in the co-mingled nanofibrous mats was monitored by UV–Vis measurements through a colored dye added to PLA and by FTIR-ATR analysis. Morphology and mechanical properties of the nanofibrous mats were respectively examined by scanning electron microscopy (SEM) and tensile tests. Water contact angles measurements were also carried out in order to investigate the wettability of the materials. Finally, the hydrolytic degradation of the mats in buffer solut…
Properties-morphology relationships in electrospun mats based on polylactic acid and graphene nanoplatelets
2018
Abstract Aligned and randomly oriented polylactic acid (PLA) biocomposite nanofiber mats filled with Graphene nanoplatelets (GnP) were prepared by electrospinning. The morphological analysis revealed the successful alignment of the fibers achieved by collecting the mats on a high-speed rotary drum. Furthermore, GnP addition on the polymeric solution leads to an increase of the viscosity with a consequent increment of the fiber diameter. Tensile tests demonstrated that the reinforcing effect of GnP when added to the PLA matrix was more than three times higher in the aligned systems if compared with the respective randomly oriented mats. DSC analysis showed that GnPs were able to slightly inc…
PLA-based functionally graded laminates for tunable controlled release of carvacrol obtained by combining electrospinning with solvent casting
2020
Abstract A novel approach was designed to fabricate high-added value manufacts, starting from cost-effective materials and combining well-known processing techniques. Bi- and three-layered, functionally graded laminates were achieved by direct electrospinning onto dense substrates. The architecture of each multilayer comprises a dense layer formed by solvent casting, which is constituted by polylactic acid (PLA) and carvacrol, and one or two electrospun fibrous skin layers, consisting of PLA only. Processing-structure-properties relationships of such materials were investigated. As regards mechanical behavior, the amount of fibrous PLA layers determined an increase of stiffness from 20 to 3…
Biodegradable Membrane with High Porosity and Hollow Structure Obtained via Electrospinning for Oil Spill Clean-up Application
2023
The use of biodegradable polymers for the production of membranes to be used in wastewater treatment has attracted increasing interest considering the possibility of reducing the risk of second pollution. In this work, porous fibrous membranes based on polylactic acid and polyethylene oxide (PEO) blends were prepared. The solutions were electrospun using two approaches: (i) conventional coaxial electrospinning followed by leaching treatment (double-step, DS); (ii) coaxial wet electrospinning with in situ leaching (single-step, SS). By varying PEO type and processing method it was possible to control membranes structure and porosity. DS leaching treatment lead to surface porosity (i.e. shell…
PLA/PCL nanofibrous blends via multi-jet electrospinning: processing-morphology-property relationships
2017
Electrospinning permits to prepare ultrafine fibers with micro to nano-meter range diameters. Multi-jet approaches can be used to fabricate blend nanofibrous mats composed by two or more polymers presenting different properties such as degradation rate, mechanical properties and so on. In this study, a series of PLA/PCL blend nanofiber mats were prepared by dual-jet electrospinning. The relative weight ratio of PLA and PCL in blend was controlled by changing the flow ratio of the two syringe pumps containing the polymer solutions.
Green and Integrated Wearable Electrochemical Sensor for Chloride Detection in Sweat
2022
Wearable sensors for sweat biomarkers can provide facile analyte capability and monitoring for several diseases. In this work, a green wearable sensor for sweat absorption and chloride sensing is presented. In order to produce a sustainable device, polylactic acid (PLA) was used for both the substrate and the sweat absorption pad fabrication. The sensor material for chloride detection consisted of silver-based reference, working, and counter electrodes obtained from upcycled compact discs. The PLA substrates were prepared by thermal bonding of PLA sheets obtained via a flat die extruder, prototyped in single functional layers via CO2 laser cutting, and bonded via hot-press. The effect of co…